2004 Chevrolet Express "removing tail shaft seal" Questions

...tail shaft... any help it sounds like you have a tail shaft seal gone in the transmission it's not a difficult fix if you are handy. Remove the drive shaft and remove the tail stock seal(there are ...

...tail shaft seal my tail shaft seal is leaking how do i replace it Unbolt the drive shaft from the rear differential. Slid the driveshaft yoke out of the transmission tale stock. The seal is right ...

shaft ( tail shaft) lever out the old seal. put sealer around new seal and fit back in extension housing. Use something that is the same size as the outer edge of the seal and tap it in flush with the

...tail shaft, remove large nut on spline, pull spline out exposing the seal, pull old seal and fit new seal, replace spline and replace nut, only tighten where the old mark was, you will see it easy as ...

...what is in there and can i take that cover off? You need to replace the rear tail shaft seal. Remove the driveline and you will be able to remove the tail shaft seal and replace with a new

...a 1993 mazda BRAVO Remove tail shaft .Remove nut on yoke . Slide yoke off splined shaft may have to use puller.pry out old seal. lube new seal and press into place , be sure not to damage, top up ...

...tail shaft . undo the pinion nut with a impact gun and pull the pinion off the shaft. Using a suitable tool pick the seal out of the housing. replace it with a new seal leaving it flush with the ...

...shaft back to get it out of the tail of the transmission then pry out the seal be careful that you don't Crack the tail case light tapping with a hammer will work to pry out the old seal then apply ...

...tail shaft must have gotten damaged when you removed the shaft. it is available at any good parts store, easy to change. you have to pull the drive shaft back out, then you can use a small hook / ...

tail shaft seal at the very rear. Most of the time it will be the pan gasket. The constant heat and vibration can cause this to occur. Not a big deal. You can pick up another pan gasket and filter and