1991 Chevrolet S-10 "bleed clutch slave cyl" Questions

Ad

...on the slave cyl. Allow fluid to drip into an open can until there's no trace of air. Close bleed valve and try clutch. If still no pedal, repeat the process. This is quite an acceptable

Ad

Question about Chevrolet S 10

2 Answers

...clutch!?Can anyone help? I've been trying to bleed the cluthc for days.I can't get the air out.No pedal.Replaced the master cylinder. This is what I would do. Fill the master with brake fluid. Make ...

Ad

Question about Chevrolet S 10

2 Answers

...bleed. clutch works but to the floor ? Open bleeder at slave. Push down on pedal and hold. Tighten bleeder and repeat until fluid is present. Then pump up and bleed remainder of air. Requires two ...

Question about Chevrolet S 10

3 Answers

...bleed nipple placed in a jar with some fluid in it so air cant go back up the tube Then open the nipple & pump slowly on the pedal! when no air is coming down the tube close the nipple & give ...

Question about Chevrolet S 10

2 Answers

...bleed clutch on a 1989 S-15. The manual claims removing/ tilting the slave will remove air- but the short hard line used clued me to try another idea. I took a small windshield washer motor and ...

...bleed the slave cylinder properly to get all the air out of the system.Have someone jump in the driver's seat and push down on the clutch pedal until it hits the ground, when it hits the ground open ...

Question about Chevrolet S 10

2 Answers

...bleed hydraulic clutch on this truck but am not sure of procedure. Where do I begin and how do I go about this. Thank !! well you will need some help make sure the resivor is full and have someone ...

Question about Chevrolet S 10

1 Answer

...clutch. We have tried bleeding it but keep getting bubbles. There are no leaks You need to Bleed the slave cyl as well as the line. Once you have the line Bled, push the slave syl's rod in as you ...

Question about Chevrolet S 10

1 Answer

...bleed slave cyl ive installed new clutch, pressure plate, throwout bearing, pilot bushing, clutch plate is in correctly, no leaks from slave cyl and still wont engage while truck is running, no ...

...new clutch assy now wont engage put new clutch assy in , bleed slave cyl and clutch still wont engage had trans out 3 times please help do you mean disengage? check for a bent clutch fork, good

Not finding what you are looking for?
1991 Chevrolet S-10 Logo

694 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...