2000 Pontiac Montana "shift solenoid" Questions

...shift solenoid valve--Inside the automatic transaxle to remove it : Remove the case side cover. Refer to Case Side Cover Replacement. Disconnect the transaxle wiring harness. Remove the 1-2 shift ...

...shift solenoid - plus add a bottle of Rislone Transmission Additive. Could the Pressure Control Solenoid also be a part of this problem - or am I just throwing money to the wind? It has 91,000 miles ...

shift solenoid? my van takes forever to shift from a low gear starting out. it takes 20 mins or so to even get it actually kick up to the next gear. the rpms are so high before it shifts so we have to

...shift solenoid it is in the transmission pan http://ww2.justanswer.com/uploads/supermechanic/2009-11-25_172428_shift_solenoid.gif Here is a link to where you can find the solenoid your looking for. ...

Have a 2002 Montana and the transmission was shifting rough. We have the fluid flushed and changed this morning figuring it was the cheapest place to start. Its still shifting rough. What is the next ...

while drivingtransmission shifts thru all gears but 3rd, doesn't slip just wont go into third gear could problem be solved by fluid and filter change or any other ideas fluid and filter would affect ...

transmission will shift into gear but wont engage does not engage any gears. It will shift to the gears but wont engage. May be a bad Torque Converter Clutch solenoid, or bad torque converter itself.

...shift through all the gears. usually i will stop and turn off the car for a few minutes and then it will return to soft shifts again. I replaced the struts and the problem is not as bad but still ...

...shift solenoid located on the 2004 pontiac montana and how much is the replacement part and repair job The solenoid is inside the valve body, If you remove the pan, the filter, you are looking at the ...

...solenoid. I have rebuild several of these, be sure to put in a shift kit, it makes a big difference. I've rebuilt them before and wasn't happy with the way it shifted, so I pull it back out, put in ...