1988 Mazda B2200 "slave cylinder leaking 1991" Questions

Ad

...slave cylinder. Replace both clutch slave and master cylinders, and bleed well. I've also had this happen. possible problem is a bad slave cylinder or needs bleeding or a bad master clutch cylinder ...

Ad

slave cylinder(on the gearbox) i think this maybe your problem. The clutch pedal can be adjusted inside the truck under the dash. You need a 10mm and a 12mm open wrenches to make the adjustments.there

Ad

...slave cylinder while you press the pedal is should "squelch" if there is air in there, if the slave cylinder doesn't make a squelching sound then the master cylinder or a hydraulic line between the ...

...slave cylinder is most likely going out. if you fix that you should change the Throwout Bearing Pressure Plate clutch , alway get the heavy duty package. and inspect the folk... that holds bearing , ...

...caused by a bad clutch master cylinder, a leaking line between the master and the slave cyl. or a bad slave cylinder. Or, your clutch may be worn out. (usually slips long before it totally goes

slave cylinder, replace them as a pair Could either be a bad slave cylinder or clutch master cylinder. Look under the truck for oil leaking by the front of transmission. If oil in the front then slave

Question about Mazda B2200

2 Answers

slave cylinder leaks clutch slave cylinder leaks what does it consist of to change it Remove the bolts holding the slave cylinder to the transmission. Disconnect the hydraulic hose. Reconnect ...

The slave cylinder on the transmission is leaking. It may be rebuilt or replaced. It will have to have the air bled out of it either way you go. The bleeder screw in on the side if the slave cylinder

Question about Mazda B2200

1 Answer

...slave cylinder could be bad and leaking,also look for leakage at clutch master cylinder,go to transmission and see if leakage is at slave cylinder,here's how to replace,Here's the part.Here's my 85 ...

Question about Mazda B2200

1 Answer

...slave cylinder. If the reservoir is low on fluid and the slave cylinder is leaking at the rod, replace it and bleed it at the slave. This is a common problem with a Toyota where the slave cylinder ...

Not finding what you are looking for?
Cars & Trucks Logo

546 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Mazda 6
2004 Mazda 6

738 Questions

2000 Mazda MPV
2000 Mazda MPV

692 Questions

1999 Mazda 626
1999 Mazda 626

544 Questions

2001 Mazda Tribute
2001 Mazda Tribute

609 Questions

2002 Mazda Tribute
2002 Mazda Tribute

615 Questions

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...