1988 Mazda B2200 "replace clutch slave cylinder 1991" Questions

Replace both clutch slave and master cylinders, and bleed well. I've also had this happen. possible problem is a bad slave cylinder or needs bleeding or a bad master clutch cylinder Pull back the boot

...clutch? Check the fluid, check for leaks, if there is replace the cylinder or hose and bleed the lines of any air. There a two cylinders, the master cylinder(on the fire wall not far from the brake ...

...master and slave clutch cylinders but clutch still does not work- is there something else i need to look at? if you replace and shure to make a good bleed on clutch fluid, then replace clutch ...

clutch master or slave cylinder, replace them as a pair Could either be a bad slave cylinder or clutch master cylinder. Look under the truck for oil leaking by the front of transmission. If oil in the

...could be bad and leaking,also look for leakage at clutch master cylinder,go to transmission and see if leakage is at slave cylinder,here's how to replace,Here's the part.Here's my 85 Nissan

...rod, replace it and bleed it at the slave. This is a common problem with a Toyota where the slave cylinder creates a leak. If the slave was fine, then the clutch needs replacement. have a good day

...reservoir. Get assistance and bleed the air out of the clutch system. IF there is a leakage at the slave cylinder and the vehicle is over 5 years old replace both the slave and the master

replace it is not a small job. The transmission and transfer case have to be removed to access it. The job is = to 3/4 of a clutch replacement, and requires the proper equipment and more than a little

...clutch slave cylinder on the transmission for leakage and check the reservoir fluid level. If the reservoir has run low, you may have air in the lines. If the slave is leaking, replace the slave and ...

...the bell housing) and look to see if it's leaking. If so, you need to either rebuild the slave cylinder, or replace it with a new/rebuilt unit. Check the clutch master cylinder to see if its