help, you may have a bad clutch master cylinder. Check for leakage around the master cylinder and on the inside below the clutch pedal. If any wetness is there, the master cylinder will need replacing
Question about Honda Cars & Trucks
...master cylinder that has leaked out the hydraulic fluid. Fill the clutch master cylinder (near the brake master cylinder) with brake fluid and pump the clutch pedal several times. The clutch work ...
...master cylinder. What else could it be?? Are you using authentic nissan parts ? If you are, not that is where your problem might exist .Have you checked the clutch pedal to ensure it is not sticking ...
...master cylinder replaced and the linkage adjusted if neccessary. you will be money ahead to have them replace the slave cylinder at the same time. that rod stays in there when fixing the pedal you ...
master cylinder others have said need to change master and slave (which is loads of money) what do you think? check and make sure the cable is not sticking first clutch on a freelander is fluid based
car is stuck in gear automatic or stick sounds like a stick change the clutch or if it has a master cylinder for your clutch replace that or the slave cylinder
Question about Mazda RX-7
...master cylinder and slave cylinder? You could refill but, i would replace the clutch master cylinder and slave cylinder as well. these two parts are failing. I had this same problem on my last 91 ...
...master cylinder in clutch in an attempt to stop the car sticking in gear and moving when foot taken of brake. It still moves while the clutch is still depressed and needs brake to stop vehicle. ...
...master cylinder clutch, upper. (Replace) - Worn out clutch cylinder clutch, lower. (Replace). - Worn out clutch plate. (Replace) - Worn out pressure plate. (Replace). - Clutch bearing defective or ...
98 questions posted
Usually answered in minutes!
70 Questions
59 Questions
50 Questions
45 Questions
35 Questions