2000 Dodge Durango "transmission not shift" Questions

...Shift Solenoid/Transmission Relay Circuit"  If this is the code you had, please note that this code is a CIRCUIT code.  The circuit includes the 3-4 shift solenoid, the transmission power ...

shift into reverse, all other gears work ? is it the transmission? YES SOUNDS LIKE IT IS THE SOLENOID NOT SHIFTING INTO REVERSE OR TRANSMISSION CONTROL MODULE NOT SENDING SIGNAL TO VALVE BODY SOLENOID

not shift past 2nd gear.transmission gose into reverse and pulls just fine,no noise it just wont shift past 2nd gear transmission shift valve is probably stuck...will need to be looked at and serviced

...shift the transmission into neutral and slow down to less than 5 mph. Once your vehicle slows down to this range, your can switch your transfer case into 4-Lo mode. Due to the inner workings of the ...

...shift position cable that goes to the transmission is sticking or that the return tension spring might be streached or broken Mine was sticking I had hard upshifts when it finally shifted later than ...

...Transmission 3-4 shift solenoid or transmission relay circuit problem. The PCM (engine computer) is seeing an incorrect input electrically for the gear or speed it should be seeing. You will need to ...

...let them fix it. Now days, transmissions are very hard to work on yourself. replace the rear output speed sensor, that is what the computer uses to know when to shift the transmission into

...shift out of first gear. Unfortunately automatic transmissions in Dodge trucks are notorious for breaking down. First thing I would try is to change the transmission filter and fluid quite often if ...

transmission will not shift out of first gear until 4,000 rpm and from there it shifts fine. what is the problem? problem is due to normal trans clutch pack wear. you can add a transmission additive ...

...shift into 4th or overdrive. I am trying to make this vehicle correct for a friend that has little or no money so any help would be greatly appreciated. sounds like a stuck valve. I'm still new to ...