2004 GMC Envoy "gas pedal doesnt work" Questions

gas pedal and set the rpm steady in 2000 rpm only. 3. then spray vigorously in 8 seconds the inside circle opening of mannifold while your friend steady step on gas pedal with steady 2000 RPM only. 4.

...gas pedal line broke im planning on repairing this but it wont crank unless i pull on the gas pedal line as soon as i let go it dies out lights and car nothing works but will turn over fine is ther a ...

...gas pedal no bad codes on comp.fuel pressure steady at regulator on fuel rail all vacumes working no plenum leak stumped on this one thinking map or maf sensors how to check or would comp. read that ...

gas pedal sticks Gas pedal sticks the throttle plate gets gunked up, you can clean around it and use vaseline and if that doesnt work you can clean the throttle body with brake cleaner on the outside ...

...gas pedal doesnt work?? i try accelerating and nothing, seems as if the car is in neutral? any solutions? It good have a broken throttle cable also on a lot of vehicles there are sensors on the gas ...

when turn ignition on ,gauges doesnt work,gas pedal doesnt work when pressing on it you have a bad ground it's a fuse in the fuse box. check manual for location

...If the vehicle is a standard then also check the switch on that pedal for the same reason. I don't really know what you mean by "the gas light" do you mean the light behind the gauge

...gas pedal and then when letting up on the gas then it starts to come back. It doesnt want to go over 80 and it takes its time getting there. It doesnt have that get up and go. i have had the fuel ...

...gas pedal to the floor and try to start but keep pedal to floor until engine starts and revs, this may take a few trys, dont crank more than 10 to 15 seconds, if this doesnt work then replace the ...

...gas pedal had no throttle responce after jump starting is it diesel, drive by wire or cable? is the pedal hard like stone and doesnt move? if its electronic then the sensor is prob bad. if its cable ...