miss fire on the number one cylinder. I changed the plugs and it is still missing badly Try moving the coil pack from cylinder 1 to another cylinder (swap locations) and see if the same code comes up.
...shops. it's clear the miss is on #6 cylinder. you will need to see if your getting spark on that cylinder and check for fuel getting to that cylinder also check for vaccum leak around #6
...code and see which cylinder is the one that is missing.Then remove that coil and check the plug.The coils are known to go bad on these vehicles.To make sure you can swap it with another coil if the ...
...miss that is not serious enough to pick one cylinder. The computer measures RPM on each cylinder as the plug fires. So it is not that a cylinder is not firing but rather that it is not producing ...
Which is cyc 5 miss fire I have replaced the plug coil pack and injector have also checked all wiring and grounds what am I missing cylinder 5 has a dirty or sticking injector. check pvc and egr valve
...cylinder was misfiring, Ok need new coil right ? so bought new coil pack and spark plug and changed out and no change, so bought new M.A.P sensor, again no change, still runs rough and missing, what ...
2002 trailblazer miss fire on #1 cylinder. cleaned injectors,no known vac leeks. intake manifold leek? This may help give you more ideas: http://www.obd-codes.com/p0301
has rough idle and a miss throwing a P0300 code P0300-Multiple cylinder misfire need change spark plugs, fuel filter and oil filter
...miss in a specific cylinder. if you are not experiencing a miss or , hesitation in the performance of this car, it will most likely be a failed sensor. Auto zone will run the diagnostic scan free of ...
code p0300. i have change spark plugs,clean injector, chack engine presure is up to 180.still missing.and i romuve catalizer. Check compression on the misfiring cylinder, these engines burn valves and
3,943 questions posted
Usually answered in minutes!
3,219 Questions
1,576 Questions
1,050 Questions
976 Questions
217 Questions