...engine runs great with the front O2 sensor unplugged, but gas mileage is poor. MIL sets a lean mixture code. Could be a short in the wiring for the O2 sensor. I currently have the same issue only my ...
...code, engine starts really rough, idle goes from 500 to 1500 over and over, after warm-up, engine runs smoother, still has code PO 108. Turn vehicle off, after 2 minutes try to restart and motor wont ...
...No Trans Braking Error code 524264-14. Discussion started: 5 .... Error code 108-1displayed. Discussion ... Yale forklift has perkins 4203.2 engine oil
p0108 have code p0108,and check engine light on Code 108 is for a problem with the map sensor that measures engine vac. The sensor would need to be tested.
Question about Cars & Trucks
engine light code 108. I changed the MPF and it works better better but the check engine light comes on again after I shut it off and restart the engine. I have no pressure air leaks. Could be a wring
...code 108, I changed the MAP sensor with no change, I have changed the IAC, with no change. Engine starts rough and the rpm goes from 500 to 2,000 while running very rich, after a minute or so the ...
check engine light code po 108 More p0108 detail @ http://www.obd-codes.com/p0108 Good luck!
engine light code po 108 what part in needed ? That is a Trouble Code related to a voltage problem with your MAP Sensor. See this article for ...
engine light is on. was told it may be a failed solenoid. how do i know which soleoid is bad? You will need to know what the code number is. Example: po420, usually an exhaust code. Get to code id and
...high circuit on a 1996 olds That is a MAP sensor code that can be set if the vacuum hose to it is off or broken,or if the sensor is unplugged or anytime the engine runs poorly.Last is a faulty
2,263 questions posted
Usually answered in minutes!
1,849 Questions
1,529 Questions
1,438 Questions
1,339 Questions
1,200 Questions
