1996 Chevrolet K1500 "clunking noise put gear" Questions

...put it in reverse sometime it will like jump out of gear and make this horrible grinding noise but if you quickly shift into neutral then right back in reverse you could pull a house down! some time ...

...clunking noise in the rear end. When I jack it up the rear tires will rotate back and forth at least an inch before moving the drive line. When I put it in gear it clunks and also when stopping fast. ...

clunking noise when outting 95 jeep in gear clunking noise when putting 95 jeep in gear that will be worn u joints grab the drive shaft and wiggle it by all u joints and see what ones have excessive ...

...clunking noise when I put it in reverse. What could it be When I put it in reverse it makes a clunking sound. When I put it in First gear it kind of pings the "backlash" felt by reversing the drive ...

...noise is from the engine . 2) Put gear in forward position, firmly hold break, and slightly accelerate engine. Should have the same result as above. If 1 and 2 have no clunk noise, then the noise is ...

that is what the clunking noise you are hearing. please do not hesitate to ask any further questions about your vehicle. please do not forget to rate and comment about your expereince with fixya today

Clunking noise in rear when accelerating 1987 924S, hear clinking noise in rear when accelerating. Put car on jacks, ran in 1st gear & reverse, no clunking noise. Only seems to happen when there is ...

...clunking when I put into or change gears...how do I check to see ig it needs tranny fluid? Try 4th gear. if not as much noise or no noise then its quite likly you need a transmission ohaul as the ...

...put into gear when putting the truck into gear there is a clunk noise, also when in forward or reverse there is a squeeking noise, sounds similiar to worn brake shoes but they were just changed 3 ...

...noise is heard when going switching from drive to reverse, from park to either, and resuming acceleration after coasting. its the selector putting the transmission into selected gear,have you checked ...