2004 Pontiac Grand Prix "replacing sway bar links" Questions

replacing sway bar. cannot get new sway bar to propper position. how do i get it to fit propperly? Your old sway bar made of tubular steel. New sway bar made from solid steel. You have a frame under ...

...Sway Bar Link I was told that my 04 pontiac grand prix need the front left sway bar link replaced. What is the sway bar links job? Also where is it located on the car? The front stabilizer shaft ...

...sway bar links EVERYTHING!!! What else could it be?? Only does it over small bumps, never over big bumps. well other than suspension components the only thing i can think of is a really toasted wheel ...

sway bar , swaybar end links, or a bad hub and bearing, if you dont know what you are looking for the best thing to do is take it to a shop and have the diagnose is, it will be a lot cheaper then

...sway bar links they are cheap and easy and are common for breaking. The lower ball joints will also have to be seperated to change the axle shaft so you may want to get new balljoints or definatley ...

...sway bar on a 1997 pontiac grand prix se 3.8 Tools needed - Wrenches 15mm, 13MM, 18MM. Sockets : 15MM shallow, 18MM deep, Hammer, Wire brush, Grease. Jack the car up and put it on jack stands, this ...

...sway bar end link bushings. With just replacing the bushings, you will find a great improvements to your suspension's performance. If you are worried about the starter, you can pick one up from the ...

...sway bar bushings? i have a 2000 Dodge Dakota sport with a squeak when I hit a bump, or when I first turn. I believe its my sway bar bushings that are lose....I have no real idea on what the part is ...

...2 bolts on each of the 2 caps and lower the sway bar. Is the bar cracked? should not require replacing if it isn't cracked. the rubber bushings and links do wear over time and yes the bar can

...replacing the Sway Bar Links to the Struts. My problem is that the distance between the sway bar bracket and that of the struts are not far enough to mount the links properly. Ive tried to "pry" the ...