...front stabilizer shaft (sometimes called a sway bar) is mounted to the top rear of the frame and to the lower control arm. The shaft is attached to the frame with clamps and rubber insulators and to ...
replace broken sway bar for a 1996 ford windstar Section 04-01: Suspension and Wheel Hubs, Front 1996 Windstar Workshop Manual REMOVAL AND INSTALLATION Stabilizer Bar Removal Raise and support the ...
...replace if required. Lower ball joint and seal is part of front suspension lower arm and must be replaced as an assembly. NOTE: Do not tighten the front suspension lower arm bolts and nuts to the ...
...front rotors w/ EBC (has dimples like golf balls) and slotted. Installed OE brake pads. Everything was done 3 mo ago. Here it is again, when I step on the pedal, pedal becomes "simmy" (same condition ...
Question about Pontiac Grand Prix
...front wheel drive model. I have the same problem on an '04 model. I'm replacing the Stabilizer link bars. That is here my noise is coming from. Should be able to replace with a minimume amount of ...
...replace sway bar bushings... Have service manual on CD... One bolt on passenger side bushing bracket is inaccessible; blocked by the heater valve... Manual says to "remove 2 bolts from heater valve ...
...front and back. Clean off drips and any fluid under the car. Start car and watch for leaks. if fluid is flowing out the bellows, you need to replace the steering rack assembly. There is no fluid in ...
bar put on and had the tires rotated, balanced and had an alignment done. What will fix the Wobble? Steering dampner (thing that looks like a shock absorber mounted sideways) can cause this. Most good
...Replace the front wheel and tire assemblies. Refer to Section 04-04 . Replace wheel covers. Lower vehicle. Refill power steering oil reservoir (3A697) with Premium Power Steering Fluid E6AZ-19582-AA ...
2,324 questions posted
Usually answered in minutes!
1,236 Questions
1,211 Questions
1,043 Questions
1,014 Questions
893 Questions