1997 Dodge Intrepid "car front end shakes slowing" Questions

...front end alighment for your car. Does your car drift left or right when you take your hands off the wheel for JUST A FEW SECONDS? Check and see if your front tires are in good shape, they should NOT ...

...car shakes really bad while pushing on the gas paddle. what could be wrong. thanks for your time bad worn tires or the transmission is jumping ex your doing 50 to get to 100 kmh the rpms bounce from ...

the problem that ur experiencing. Then have someone check your front end for you just to eliminate the ball joints, and tie rods. If that's all good, then perhaps you have a faulty, CV axle. good luck

...front end in park. the car also shakes (and the brake peddle pulses) when I slow down from speeds of 35 mph and over The noise would usually be the strut or the control arm bushings. The vibration ...

front end shakes and wobbles at certain speeds and when i take a left turn the front end shakes to a point where i have to slow down it feels as if the front end is going to fall apart Struts and ...

front end just started to shake, I put air in the tires and it shakes more, it seems like it shakes on each tire revolution. It doesn't seem to shake as much when it's going 60 to 80 but anything slow

...front end shakes While driving at around 55 mph when I hit a seam or rough patch of road the front end shakes very bad and I have to slow down. The shaking stops and I can continue at hwy speeds. I ...

...car is in drive at stop light or sign front end and steering wheel shakes really bad. What could the problem be? also when slowing to make right turn there's a clupping noise from driver side front. ...

front end shakes when slowing down Front end shakes when slowing down brakes and rotors are good. When not pushing brake it rides fine. did you check your brake rotor for warpage. even a .010 warp on ...

Front end shaking while on highway starts bad and hard to control. Slow done fast and it stops. Once starting up to speed doesn't continue to shake Just replaced ball joints and tie rods in July, no ...