2003 Mitsubishi Diamante "intake manifold plenum" Questions

...intake manifold plenum. Remove the spark plug cables. CAUTION: When pulling off the spark plug cable from the plug always hold the cable cap, not the cable. Remove the spark plugs. Hope it

ANTI-FREEZE LEAK AT INTAKE/PLENUM MANIFOLD. ANTI-FREEZE LEAK AT ENGINE INTAKE/PLENUM MANIFOLD. Not alot you can do but remove the intake plenum and have the gasket replaced.

...intake manifold, modern fuel injected cars and trucks (gas engiones) have a upper and lower intake manifold, the upper section is called the plenum. It is the upper intake that looks like aluminum ...

...intake manifold by 3 O-ring gaskets. Push onto the back of the intake plenum near the firewall to expose a gap at the front of the intake plenum at the front intake manifold. Put 2-3 long flat ...

...intake manifold (this is the solid large plastic cover that covers the top of the engine when you remove the engine cover). There are many wires and small vacuum hoses to disconnect. Plus.., when ...

...intake manifold supports.8. Remove support brackets at the intake manifold front corners and MTV.9. Loosen upper fastener attaching throttle body to support bracket.10. Remove clips attaching EGR ...

...intake plenum assembly. It is combined with the Manifold Absolute Pressure (AFS) sensor. 6.- This sensor is located in the air intake plenum assembly. It is combined with the Manifold Absolute ...

...intake manifold on 2005 Buick Lesabre You didn't post the size of your engine so please pick the appropriate one: 3.8L Relieve the fuel system pressure. Drain the cooling system. Remove or disconnect ...

...intake manifold from injector assembly How do you seperate the upper intake manifold from the fuel injector assembly? Are there clips that prevent the upper intake manifold from sliding over the ...

replacing intake manifold plenum 2007 dodge magnum 3.5 intake manifold plenum, replace what the hell is the question here? nothing. remove old one and put new one in.