1996 Mitsubishi Eclipse "asd relay" Questions

Ad

Question about Mitsubishi Eclipse

1 Answer

...asd relay and fuel pump relay also the camshaft sensor. What could be the cause? Help please. A broken or corroded wire in the ASD relay socket, a blown fuse, a loose bulkhead connector, or even a ...

Ad

the coal Can't get any fire What do you mean , no fire to coils ? The coils are not throwing any spark ? or no Battery + power to the coils ? If it is the latter ,check the ASD relay in fuse/relay box

Ad

Question about Mitsubishi Eclipse

1 Answer

...ASD relay and Computer) I had this same issue a few years back with my 2000 MItsubishi Eclipse. I was told the starter relay needed to be switched out. It has happened more than once, so I keep an ...

Question about Mitsubishi Eclipse

1 Answer

How do I test the ASD relay Coil looses power.if I bump the car the power comes back on and the car will start look for a loose earth wire probably on the battery or motor /chassis point

Question about Mitsubishi Eclipse

1 Answer

well that sounds like a relay. if your car is an automatic, double check than you replaced the ASD and fuel pump relays and not the trans control relay. if its not the relay, its probably the ECU(PCM)

Question about Mitsubishi Eclipse

2 Answers

...ASD relay, make sure its working. if thats okay, check the Cam Angle and Crank Angle sensors. if it isn't any of those, its probably the ECU I have a eclipse 98 rs. Wont star i replace cam and crank ...

...ASD relay and the MFI relay was out of spec by about 13ohms. Replaced it and it did the same thing. Could it be a bad fuel pump. Dont know where else to turn. Hello The engine and the automatic ...

Question about Mitsubishi Eclipse

2 Answers

...ASD relay is operating so I assume it is intalled correctly for the 95 PCM. The crank sensor is also working properly the only thing we can't get is spark. I have placed a voltmeter on the connector ...

2.0l non-turbo auto...crank no start....fuel pump relay and asd relay got no ground...i change the crankshaft sensor... remove ecm then clean all plugs then reinstall tighter. works every time..

Question about Mitsubishi Eclipse

1 Answer

ASD (MFI) relay is bad or your ECU is not grounding it or it's shot. All power to ignition and fuel pump goes through the ASD relay. Basically you want to test jumping (bypassing) this relay. Not sure

Not finding what you are looking for?
1996 Mitsubishi Eclipse Logo

493 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...