Question about Oldsmobile Silhouette
...ABS to declare a fault. When you start with foot on the brakes the brake lamp is pulled on (I don't know if switches hi or lo) so that module doesn't declare the fault until you release the brakes. I ...
Question about Oldsmobile Silhouette
brakes and they are sometimes hard to push and it almost feeels like they are not going to work then they all a sudden go to the floor and work. trying to find the abs fuse to disconnect it.... please
Question about Mercury Cars & Trucks
...brakes engage w/o applying brake petal. How do I get that to stop? check fuses and relays ---check your abs [anti-lock braking] system a sensor or wiring connection may have been disconnected or ...
...brakes work fine? http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html ---------------- VCS and ABS lights go on and off intermittently on Lexus? ...
Question about Ford Cars & Trucks
...brakes will work as NORMAL brakes and you will now see if the rear brakes heat up. They more than likely will as the ABS would not have any effect on the brakes in normal running situations. Suggest ...
...brakes dont work as they used to its cause of this.. the abs sensor determines how fast and hard the brakes need to hold for a smooth stop.. in the fuse panel under the hood ,, locate and remove the ...
...brakes would work sometimes and sometimes not at all. The master cylinder is full and there are no brake fluid leaks anywhere on the truck. Where do i start?? if you are getting an intermittent soft ...
...remove the key! Not sure if it is coincidental, but the ABS light has been on for a few weeks. There is a shift interlock mechanism that only alows the key to come out in park. It is the same ...
...bad there is a malfunction with the abs motor/computer.. if you remove the abs fuse and the brakes work good,, except now without abs!(just like a pre abs car) than it is an abs module ...
Question about Oldsmobile Silhouette
...? It is not recommended. But you can remove the ABS fuse in under hood fuse box. To disable ABS system, if it is giving a problem. then the brakes should work like regular braking system.
609 questions posted
Usually answered in minutes!
601 Questions
450 Questions
322 Questions
268 Questions
211 Questions