...idler pulley, that would make things easier, you can use a stock belt with that kit. Check this for 99' and older belt routing... Also, check this diagram (click over pic for zoom)... The tensioner ...
...IDLER pulley in the fan belt train of pulleys with a heavy spring on it that keeps tension on the timing belt. 2. Get a spanner/socket and put it on the nut in the middle of the idler pulley. 3.heave ...
Question about Dodge Intrepid
idler pulley on a 99 regal? socket not a bolt? 1/4 " hex bit seems loose and too large for 6mm hex and too small for 7 mm hex? instead of using AF size bits(1/4") try using metric bits as they come in
...idler pulley near the A/C unit.) 18) Remove the Thermostat (upper hose return) housing. Scrape off old gasket. Replace with 160deg or 190deg thermostat. Use silicone on gasket. 19) Carefully use a 17 ...
...idler pulley, since it does not drive any accessory on your vehicle. Its only function is to give the belt its proper tension. Insert a long boxed-end wrench on the auto-tensioner pulley bolt of the ...
...idler pulley or alternator with a bearing going bad. remove belt and spin the pulleys and see if you see one that feels rough I HAD THE SAME PROBLEM A FEW WEEKS AGO, AND IT WAS THE LITTLE ROUND WHEEL ...
Question about Dodge Intrepid
...pulley, idler pulley, or some other culprit? Get an inexpensive mechanics stethoscope and put the end on the shaft part of idler pulleys, housing near bearings of alternator and water pump etc. If ...
...idler or tensioner pulley. look for a pulley that is out on an arm by itself and you can (somewhat) move the arm by hand, you will need a special tool to move that arm enough to get the belt off of ...
...idler pulley. but i can't see it. once i get the mounting brackets loose i will be on my way to replacing the power steering pump. I have changed the pump out on my wife's 99 Voyager, 3.3 liter. Per ...
1,572 questions posted
Usually answered in minutes!
867 Questions
924 Questions
766 Questions
627 Questions
548 Questions