1999 Dodge Intrepid "idler pulley" Questions

idler arm pulley Help replacing idler arm pulley An idler arm is a steering component found on vehicles without rack and pinion steering. Your referring to an idler pulley. To replace: remove the belt

...idler pulley on 2002 intrepid I have a 2002 dodge intrepid 2.7L engine. I just replaced the generator/power steering idler pulley. I have the belt at the correct tension for a new belt...however the ...

...idler pulley...any suggestions? It could be any of the pulleys on the engine. Water pump, ac compressor,alternator, idler, or power steering pump. I would say that it is more than likely the power ...

...a problem faced by lots of dodge vechicles,remove a/c belt and check the alignment of the idler pulley and check to see if idler bearings are good,spin the idler and listen and feel for ruff ...

my idler pulley isnt sitting correctly its tweaked and squeals brand new replacement and belt trying to eliminate squeal Bad bearing on idler pully? Replace pully.  

idler pulley bearing, but I've checked the engine noise with the accessory belt off and it stll makes a noise. I've also checked the water pump and timing belt idler pulley bearings and they are OK. I

pulley diagram is i need to replace a idler or tesion wheel I just do not know the exact name it is the one that is on the passenger side of the engine Below is a diagram for 3.5L engines. The tension

timing belt grinds It likely has a bad waterpump or a idler pulley or tensioner pulley. Check all three when you replace the belt.

Cannot seem to adjust the tension on the Idler pulley. When I put the pulley on the bolt seems to be to long, and I cannot tighten it down have you got your bolts mixed up??

ac how do you replace the belt on a 1994 itrepid ac unit There should be an idler pulley that keeps the belt tight, you loosen the center bolt in the pulley then turn down the adjusting bolt.