2003 Chevrolet Impala "remove fan pulley olds" Questions

Ad

Question about Chevrolet Impala

1 Answer

...fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new ...

Ad

Question about Chevrolet Impala

3 Answers

...remove the fan? dont hold it,i personally bang the fan clutch nut with a long chicel and hammmer.it sounds funny but works great.do it before taking belt off. Several ways to accomplish this. Leave ...

Ad

...Remove fan clutch assembly bolts. Remove 5 cooling fan shroud bolts. Remove fan shroud and fan as an assembly. Loosen alternator mounting bolts and remove drive belt from pulley. Remove fan pulley. ...

Question about Chevrolet Impala

1 Answer

...Remove fan belts first, then removed fan pulley bolts these are on the front center of the fan hub,,,remove these bolts. Then remove the fan, and hub off the front of the water pump,,then remove the ...

...fan belt. But don't know hos to put on the new one.1996 Chevy Suburban w/ a 5.7 liter engine. The paper with the routing information is missing. Removed when the radiator was replaced. LOOP THE BELT ...

Question about Chevrolet Impala

2 Answers

...remove the fan or the fan shrow you can put the belt on by looping the belt partially on a fan blade and then turnning the fan blade kinda like a bicycle chain and if it is the power steering belt ...

Question about Chevrolet Impala

1 Answer

...fan shroud 3.Remove drive belt 4.Remove front crank shaft sensor 5.Hold down the crank pulley(strap wrench) 6.Use a breaker bar,front pulley nut is 22mm Becareful at this area, when pulling out the ...

Question about Chevrolet Impala

1 Answer

...Remove fan/viscous fan drive assembly from water pump by turning mounting nut counterclockwise as viewed from front. Threads on viscous fan drive are RIGHT HAND. A Snap-On 36 MM Fan Wrench (number ...

...Remove the fan shroud, if so equipped. Loosen the alternator pivot bolt and the bolt attaching the alternator adjusting arm to the water pump. If applicable, remove the power steering pump bracket ...

Question about Chevrolet Impala

1 Answer

...remove the belt ? ther are 7 fan shroud bolts you can split the fan shroud ? 2 bolts on the lower right and 2 on the left ? after you do this then you should be down to pulling off the fan and pulley ...

Not finding what you are looking for?
2003 Chevrolet Impala Logo

3,287 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...