2003 Chevrolet Impala "remove belt tensioner pulley chevy" Questions

Ad

...Remove the loosened belt off one of the other more easily accessed Pulleys. D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position. Standard Rules for ...

Ad

Question about Chevrolet Impala

1 Answer

...remove the belt from the belt tensioner pulley. 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment. 4 Route ...

Ad

Question about Chevrolet Impala

1 Answer

...Remove the loosened belt off one of the other more easily accessed Pulleys. D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position. Standard Rules for ...

...remove the belt then take a small wire brush and clean out the groove on each pulley.if no material found take a mechanic stethoscope and listen at each pulley for the squeal while the engine is ...

...the idler pulley, if the pulley is on a bracket that is spring loaded that is called the belt tensioner pulley, remove it and take it into the store to ensure they give you the right one. good

Question about Chevrolet Impala

1 Answer

...remove the tensioner to install the elbow. There is another fitting that goes in the other side of the tensioner that you may also need to replace as they tend to get damaged when removing the ...

...remove the serp belt and alternator,unbolt the tensioner,there are 2 of those plastic elbows, Think the are just 4 bolts holding the tensioner on. Taking the tensioner pulley off makes it ...

...belt, then remove the bolts on the water pump, you will have to use a ten mil socket for this) also be careful not to lose the bolts, sometimes they will fall down on the ground if your lucky & ...

...the direction that loosens the belt. Once tension is relieved, pull the belt off a pulley and remove the belt. You will reverse the process to install the new belt. Good luck and let me know.

Question about Chevrolet Impala

1 Answer

Belt Remove the accessory drive belt. Raise and suitably support the vehicle. Remove the engine shield bolts. Remove the engine shield. Install a ratchet into the air conditioning (A/C) belt tensioner

Not finding what you are looking for?
2003 Chevrolet Impala Logo

3,287 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...