mneed to know how to retrieve a trouble code and then solve the issue You will need at least a code reader You can go to the parts store for the Generic Codes Then you need to study, in your case OBD1
Question about Buick Century
1998 buick century high mount brake light doesn't work, bulbs have been replaced 1998 buick century high mount brake light doesn't work, bulbs have been replaced pig tails look good there ...
"Service engine soon" light still on I came to you with the same problem in Nov. You suggested that we remove egr valve since we had already replaced it and open throttele to see if there wer carbon ...
heater does not work, air blows, no heat 1. Check the level of antifreeze to make sure it is up to the proper level. If it is not, then fill it up to the proper level. That could solve your problem. 2
the only gear my car goes into is park the only gear it will go into is park i can pull my shifter into all the gears but wont stick thou & it sounds like it wants to click into the gear but ...
engine light blinking 97 buick lesabre 3800 check engine light blinking during exceleration only You may have a bad spark plug wire or plug, if that doesnt solve the problem it could be the ignition ...
Wipers when turned off remain upright position There is a pin that broke in the wiper motor for the park position. replace wiper motor and problem is solved.
My 1999 Buick Century keeps running hot. I would suggest changing out your coolant radiator cap and thermostat. This should solve your problem
cooking instructions for steamers good day, hope this link below will solve your problem. try amazon.com. it has plenty of books for steaming
tail lights dash lights out This problem was solved in my Buick by replacing the headlight switch. It's about 20 dollars.
166 questions posted
Usually answered in minutes!
921 Questions
813 Questions
785 Questions
797 Questions
687 Questions