Question about Saturn Ion
4 cylinder is showing miss-fire & low pressure--could this be false reading--I'm getting same gas mileage & runs fine Ihad in shop to get engine looked at--I was told would have to tear engine
Question about Saturn Ion
...cylinder # 1 and/or # 4 Misfire Counters counting up? -- YES - Go to DTC P0300 NO - Go to Step 5 5 Turn ON the ignition, with the engine OFF. Disconnect the ignition control module (ICM). Measure the ...
...4 cylinder try moving your spark plug to another cylinder and see if the code follows it like #2 cylinder would be P0302, You can do the same with plug wires if they reach to a different clyinder. ...
Question about Cars & Trucks
...cylinder 4) - switched coil from 4 to 2. Light ... Jeep Liberty Questions - Cylinder Misfire code - CarGurus www.cargurus.com > Questions > Jeep > Liberty CarGurusMay 27, 2009 - #4 misfire new plugs ...
Question about Saturn Ion
cylinder 3 and 4 replaced igntn coil.. OBDII code P0352, misfire on cylinders 3 and 4. I replaced the spark plugs and a new ignition coil. Code still the same. All started when cad converter went out.
Question about Cars & Trucks
...4 cylinder.You may need a spark plug or coil or spark plug wire etc on that cylinder. code p0304 is misfire on no 4 cylinder probably from problem injector injector wiring plug ,HT lead or coil or ...
...cylinder 4. Compression tested (all fine) on all cylinders, spark plugs and wiring replaced, timing belt replaced, coil replaced. Only does it on first start in extremely cold temps. Once engine is ...
Question about Saturn Ion
...4 cylinder misfires or something like that. I changed the spark plugs and that didn't change the misfires. Haven't replaced the oxygen sensor or EGR sensor yet because they are too ...
Question about Saturn Ion
...4 cylinder--can be bad plug-coil -wire-problem with 02 sensor--fuel injector-bad exhaust valve-cat conv- poor ,compression -these are most of the reasons that an cause a misfire and yours is ...
...cylinder 4 misfire. How do I repair the problem Well we should always look at the lowest number codes first. So P304 is cylinder 4 misfire. We need to check for spark, fuel and compression. Look at ...
245 questions posted
Usually answered in minutes!
676 Questions
581 Questions
541 Questions
394 Questions
73 Questions