2008 Dodge Caliber "throttle body" Questions

...i loose power when throttling up to pass test and/or replace throttle position sensor Lightning bolt symbol is the throttle body, costs between 250 and 300 at advance auto, gas pedal is another

engine will idle but wont will not accelerate TPS sensor at the gas pedal or the throttle body module. Have the codes read.

CODE 7E9a/t I have replaced the throttle body and the air control sensor and got the code 7E9 A/T. What is the standard OBD2 code please.

THROTTLE BODY ELECTRICAL CONNECTOR. REMOVE THE THROTTLE BODY.PUSH THE STARTER UNDER THE INTAKE MANIFOLD.TIP THE NOSE OF THE STARTER TOWARD THE COOLING MODULE.PULL THE STARTER UP AND OUT.DISCONNECT THE

...throttle body Throttle sensor light kept flashing. Car would act as if it was going to stall out but never did. My husband took it apart and found oil not only in the throttle body motor, but also in ...

where in the engine is the throttle body located? Your throttle body is at the opposite end of the air tube that takes air from the air filter to the engine. The TB sits on top of the intake manifold.

were is throttle body on 2007 dodge caliber Fallow the air intake tube back to the engine and at the end of the tube will be the throttle body.

ETC light came on. Car goes 15-20 mph. Let cool down and it works ok then does it again. Would throttle body need changed or possibly other part? Motor crank sensor

2008 dodge caliber will only idle no throttle response Either the throttle body(TPS) or the gas pedal(APP). A scanner will tell you real quick. I have replaced more APP's than TPS's.

...you tell me where to find it on the motor? P2004--Intake Manifold Runner Control Stuck Open (Bank1) Remove the Air intake ducts --to throttle body ,you should find the Runner Control Motor or ...