2008 Dodge Caliber "remove passenger side air bag" Questions

dodge caliber passenger side air bag removal how to remove passenger side air bag take clove box out first un hook batt. un plug airbag it well unbolt

...Remove the passenger air vent duct. Disconnect the duct from the heater box housing. Disconnect the duct from the instrument panel register and remove. Disconnect the passenger air bag module ...

...remove the front driver side and passenger side air bags in my 03 ford expedition? Remove the negative cable from your car battery before replacing car air bags Deactivate the air bag by removing the ...

...Remove or disconnect the following: Ignition key AIR BAG fuse from the instrument panel fuse block Left-hand sound insulator Connector retainer and yellow 2-way connector at the base of the steering ...

PASSENGER SIDE Remove air bag fuse from fuse block. SIR ENABLE: Driver Side Turn ignition switch to LOCK and remove key. Connect yellow two-way connector and install connector position assurance (CPA)

...Remove the two passenger air bag retaining bolts. Disconnect the passenger air bag module electrical connector. Placing one hand in the glove compartment, push the passenger air bag module out and ...

...Remove the glove box door and the passenger's Air Bag lower cover. Disconnect the yellow 2-way Air Bag harness from the passenger's side Air Bag.(the danger point) Remove the four console screws. ...

...Remove the passenger's side SRS by removing or disconnecting the following: Glove box door and the glove box Front passenger's air bag module connector 2 special bolts using a tamper resistant Torx ...

...above the passenger side air bag behind the passenger side air bag there is a metal plate with i think two bolts in it remove them and it should come loose. sorry can't remember the bolt

remove passenger side front seat Always disable the air bag system first, to prevent accidental deployment of the air bags. The main airbag module is beneath carpeting under passengers seat. To remove