2008 Ford Fusion "brake caliper piston won 39" Questions

...brake caliper won't adjust 95 Chevy lumina front brake caliper won't adjust back on driver side when changing the brakes and rotors...the passenger side adjust fine but driver side won't ...

on the uplander if the piston won't go back in the bore try cracking open the bleeder screw on the caliper see if it goes back if it does you need a brake hose if it doesn't you need a caliper

brake worked...I replaced the caliper & pads & pedal won't build up pressure to bleed but the one brake still works Replace both front flex hoses & both front calipers Take off master

...won't collapse on 2007 ford fusion Open bleeder valve & push caliper piston, in as you rotate piston to screw in parking brake Do this by hand,only use a clamp on the front ...

...caliper so it doesn't hang down in the way and stress the brake lines. Then you need to bang on the rotor with a mallet until you free it and it will come off. You may need to hammer it pretty ...

...do I adjust back brakes on Mazda mx6 I've put new pads in but the piston won't go all the way back in on disc brake setup you need to turn the caliper piston while pushing on it at same

...brake caliper -> (1) disassemble the caliper out of the car (2) blow the piston out of the cylinder with compressed air (keeping fingers out of the way) (3) replace seals & boot (4) reassemble ...

...caliper mounting bracket back on.Put the new brake pads on. Make sure to use some anti-squeal grease on the back of the pads.Put the caliper assembly back on with the slide pins. Grease up the slide ...

...brake caliper's piston won't compress for me to put on new pads if your turning the piston the right way which you probably are so it turns in not out and it won`t go back then it sounds like ...

...brake pads on 2006 Freestar ..piston won't move back with c clamp I just had this problem myself. I ended up removing the caliper completely and drained it of all of it's fluid. I then ...