2007 Jeep Commander Rocky Mountain "grand cherokee diesel problems" Questions

grand cherokee? I got a 2007 jeep grand cherokee diesel and at times the service park assist will flash and the engine light will come on. a box forms around the gears on the display and it feels like

...Grand Cherokee 2.5 Diesel. Idles Have a 1997 Jeep Grand Cherokee 2.5 Diesel. Idles just fine and will cruise along motorway but at lower speeds and revs will blow black smoke and lose power Change ...

Grand Cherokee a non-starter 2003 Grand Cherokee crd 2.7 diesel. Won't start at all - appears to be fuel problem. Will be checking pump first, then immobilier. Any other ideas re likely problem ? ...

...grand cherokee 2.5 turbo diesel power loss Hi I own a 1998 grand cherokee 2,5 diesel turbo that just suddenly started loosing power at 2000rpm. I can hear the turbo whistling up to 2000revs but then ...

...Grand Cherokee, ? left off GRAND? NO COUNTRY TOLD AT ALL, I had 1999 gas, in USA, so yah. AND PARTS ARE SOLD BEST IN YOUR COUNTRY NOT 12,000 MILES AWAY ,RIGHT? THE DEALER OF your car has the parts, ...

...grand cherokee 2 wheel drive. when i my 1996 jeep grand cherokee 2 wheel drive. when i come to a stop the engine runs ruff and stalls after the engine is warm. i have replaced the fluid, gasket, and ...

...grand cherokee won't start when it left over night I had this problem for about 3 months but it was only after i did a service , i traced the problem down to a bad diesel filter it lost its seal over ...

...grand cherokee limited. also what does code P1768 stand for and how do I solve this problem? About Jeep Grand Cherokee 1999-2004, also called WJ, you must review this information, is in spanish ...

...grand cherokee, and it I have a 2001 turbo diesel grand cherokee, and every now and then it keeps losing power, i have had the turbo and air flow checked and all is fine, has anyone got any ideas? ...

...grand cherokee jeep grand Cherokee 2003 plate Code 403 is a problem with the EGR valve. You'll need to get the flow chart to run the tests for that code to find the problem. I would suggest a shop ...