2007 Jeep Commander Rocky Mountain "car brake feel slipping coming" Questions

slipping and its rough out of 1st gear. if you throw it in neutral then back to drive everything is fine again. After hours of research i found that you have to get your computer flashed. It if commom

feel through the brake pedal. Vibration comes right before complete stop. Sounds like it's coming from the engine compartment. I feel it through the brake pedal only right before complete stop. Brakes

...before the car comes to a complete stop. It doesnt happen all the time but enough to be scary when it happens. When this happens, do you feel a funny vibration in the brake pedal and a humming

...brake pedal feels grinding or jerky feeling then the indicator lights come on. Please help??? Could possibly have a bad connection on a wheel speed sensor. This would cause an erratic reading making ...

...slipping and grabbing in the front. If i park, turn off the car and restart it goes away. check your brake fluid levels, if low there may be a leak in the system. If ok, check the ABS system for

...ABS and traction control indicator lights come on and stay on while driving and my brakes feel like they are slipping or going out. Is there a connection between the two? Get your brakes checked

...feel a grinding of my brakes after having my lower control arm and hub bearing replaced why am I steal feeling a grinding when I mash the brakes and it was from a rod connecter broke on the truck and ...

...brake hard like it or not, but the car acts like something is either sticking or slipping when you take off again from the hard stop. It is really jerky when you press the eccelerator and feels like ...

...car feels like its slipping and not stopping right the truck only has 60,000 miles on it anyone know how many miles the original brakes are suppose to last ??? you are due for new pads. Most tire ...

...feel the front wheels see if both front wheels feels hot or warm,,if 1 is hotter than the other your brake cylinder may be seized,[the hottest 1 will be the problem .. Sounds like a slipping ...