ADF, then open the Document Feeder Cover. 4. Raise the Paper Release Lever, then remove the jammed page from under the roller to the Document Feeder Cver side. 5. Pull out the jammed document from the
...ADF, then open the Feeder Cover. Remove the jammed page from under the roller to the Feeder Cover side. Pull out the jammed document from the ADF. If the document cannot be easily pulled out, proceed ...
...for detecting load paper in the ADF section. Check if there is something that keeping it stuck in that position. You will need to open the cover of the ADF section to do this. Hope it
...ADF folder and wrapped around the rollers when the cover is opened Most probably the rollers are sticky. Try cleaning the rollers with fibre cloth soaked & squeezed dry. Use a blower to clear any ...
Question about Canon PIXMA Office Equipment & Supplies
...ADF. Close the feeder cover and press OK to eject document. I don't want to eject the document -- I want to print it! Please advise. Canon Pixma MX330, ADF error, Code : 2,103,0 Here's what I found. ...
Question about Canon PIXMA Office Equipment & Supplies
cover of the ADF and look for a rectangular hole with a lever stuck down. That lever should only go down when a paper is placed in the feeder, and sometimes they get stuck in the down position. A bent
adf feed area. I found a band aid stuck in the underside of the cover when I lifted it up. Pulled it out and the message went away. As far as the band aid, my roomate is a moron. I don't know what she
Question about HP Office Equipment & Supplies
ADF cover NOTE: Remove all originals from the ADF tray before you open the ADF cover. 1. Open the ADF cover, and then close it again. 2. Press the OK button. * If still a problem, go to the next step.
...ADF, Close feeder cover and press OK. Rebooting does nothing...the printer remains in this repeating loop and there is not a thing stuck or inside it. Hello, The sensor may be dirty even if it looks ...
Question about Canon PIXMA Office Equipment & Supplies
ADF then print the document there is a black line about 1/4 inch thick down the right-hand side. There is a tiny spec on the scanner glass. Cleaning it will make the line go away. I just fixed mine by
2,559 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,594 Questions
1,302 Questions
1,216 Questions