LG 37LC7D 37 in. LCD HDTV "tv green light blinking" Questions

...green LED on the front panel of the TV that normally blinks when turned on after a power failure or when unplugged: the green light is supposed to flash for about 1 minute while both microprocessors ...

...TV's turned on there is a green light that blinks. But when i turned it on, the green light disappeared and the screen turns off then a red light blinks right next to where the green light blinks. ...

...TV, green light blinks then red temp light blinks then back to green blinking light? Z52DC2D when I turn on my tv the green light blinks,(no picture) then red temperature light blinks a few times, ...

...green light tv turns off green light never stops blinking If the blinking is continious, the fault should be at its main digital board, as these blinks indicates a SDA - SCL probelm, says technically ...

...tv (sony kde37xs955) green light blinks 9 times and red light blinks 6 times pulse a sec or two and red light blinks 6 times and keep going on and on, no sound no pic, nothing. please help! Mike hi.. ...

...tv. on instead of the green power light blinking until it is solid. It continues to blink even after being on for 30mins. There is no picture, no sound and the back of the tv is still cool Problem is ...

...i turn tv on the green light comes on and a few seconds later tv is off and red light is blinking i unplug fopr ten or twenty min. and same thing happens Replace the Main Power Supply inside the

...green power light, unplugged TV overnight did not resolve. Any idea what board this indicates needs replacing? I also have a Mitsubishi LT 55164 with blinking green status light...does nothing ...

...tv on it blinks green and never turns on Power supply board is dead,if green light on keep blinkings,notthing come on.Power green light is solid,nothing come on.Than ur Tuner signal board is dead. ...

...tv model # LC-42D72U power light flashes green but there is no sound or picture. Looking for your expert opinion on what could be wrong so we can get the part ordered. The board with the power source ...