Question about Miele Cooktops
...but now can't get it to work. Any ideas? Finally I found the meaning of FE 31. FE31 means "control panel is dirty" or "some object is on the control panel" When error code FE31 appear on the control ...
Question about Gaggenau Cooktops
...works. The model is Gaggenau CI 282 Display cleaning protection If you wipe over the control panel while the hob is switched on, settings may be changed. To avoid this, the hob has a function ...
...When complete tegy put the stove back in and everything worked fine. Within 5 minutes the control panel went off. Oven light works and top ceramic surface works and nothing else The control panel ...
Unable to disconnect existing wire on control panel I'm replacing a control panel for a GE JTP30. I have the instructions unfortunately I'm unable to disconnect 2 white wires from the existing control
Question about Dacor Cooktops
need to access the burner controls from underneath the top panel The knobs started smoking, the 1 burner popped and shut off and another burner popped and blew out green flames. Had to reset the ...
Question about Cooktops
...please? Error F14 on a Hotpoint induction hob typically indicates a problem with the touch control panel. Here are a few things you can try to fix this error: Disconnect the power supply to the hob ...
...constantly. I have ordered and received a replacement switch, but can't figure out how to open the panel to replace the switch. 1. Turn off the power at the breaker box. 2. lift off the air grill.
...switch on Error code 22 on a Defy Slimline hob usually indicates an issue with the touch control panel or power supply. Here are a few steps you can try to resolve the issue: Turn off the power to ...
Question about General Electric Cooktops
the control panel displays LOC and the time. oven door opens but unable to reset any controls. is there a way to reset the controls?? set oven to clean, door locked and after cleaning started i lost ...
...before I jump in. Thanks much! I'm not an expert, but I just had mine apart. You should take the panel off from beneath the control panel. This is a matter of removing about 6-8 screws and
356 questions posted
Usually answered in minutes!
118 Questions
87 Questions
55 Questions
38 Questions
38 Questions
