Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker "freezer set screws" Questions

...freezer. Use an Allen wrench to loosen the set crew, which is very small (my Jenn-Air requires a 3/32" Allen wrench), and then tighten the bolt on the mounting post on the face of the freezer door. ...

...freezer. on of the door handles is loose. what tool do i use to tighten handle. each handle has a screw at top and bottom. The screw seems to set deep in hole and hole is threaded. Please help me. ...

freezer. Remove the shelf and the bottom sliding food tray. Under the food tray is another shelf. There are four screws to remove the bottom shelf. Remove the four screws that hold the ice cube holder

set screws from each side of the freezer handle, then remove the handle and take a Phillips screwdriver and screw the handle anchor back into the freezer door... don't forget to check the other anchor

...set screws on freezer door handle on ken more fridge with bottom mount freezer, model no. 269-76353019 Door handle on freezer door is loose. How can I tighten it? I think that the handle is attached ...

freezer. Caution: Before testing the fan, unplug the refrigerator to avoid an electrical shock hazard. The rear panel may be held in place by retainer clips or screws. Remove the screws or depress the

...freezer door handle on a sub zero 650? There are different handles depending on serial number. The older of the two is at the top of the door. The screws are covered with a magnetic trim piece. You ...

freezer door. Now remove the screws on the middle hinge. Now pull up and remove the middle hinge while holding the frig door steady (save the spacer). Now pull up on the frig door and set to the side.

...freezer door handle came off upon looking I see the set screw on the handle came off. GE doesnt sell the set screw only the door handle. Any leads where to get a replacement set screws? any hardware ...