...PTAC TRIPS RESET BUTTON ON POWER CORD WHEN TURNED ON If you have a clamp tester, operate the unit with the clamp tester and check the current reading. If the current reading is normal but the reset ...
Question about Amana Heating & Cooling
PTAC ac 15000 BTU that has stopped, the power cord keeps tripping. I removed the power cord and plugged it in to the socket and the breaker did not trip, any clues. I'm thinking of jus t getting a new
...ptac units (ptc074D series) they are rated at 265 vac I only have 220vac. Will they work at 220vac? Is there a conversion kit needed? The 265/277v units will not work in a 208/230v hotel without a ...
...there an internal reset button? Most PTAC's have a reset on the power cord where the plug is. If this doesn't help I can find out. The new boards are a little tricky. Is this model touch pad or
...ptac i recieved a power cord replacement as per recall. did as instructions said. I did turn off master off/on switch on pc board. after i was finished I turned switch on/ closed cover and plugged in ...
...power cord. Any Idea's where I might find part numbers and ordering information? As long as you have the part number, if you have a D&L parts company listed nearby, they can probably get it for ...
...PTAC model PTH123A35AB. When we try to turn on the unit it doesn't make a sound or show any signs of working. The previous owner states that it worked for him and doesn't know what is wrong ...
flashes code ch09 will reset at power cord button and will work for a few days check the control board. Make sure all plug ins are seated good if not seat them. If not I bet its your board.
Question about Amana Heating & Cooling
...power cord will not reset? Have just installed a used ptac that was working when it was removed. I have 123 volts on both sides of outlet and I have bypassed breaker on cord with the same result. ...
276 questions posted
Usually answered in minutes!
59 Questions
39 Questions
36 Questions
31 Questions
21 Questions
