LG WM2487H Front Load Washer "water left soap dispenser" Questions

...water left in the dispenser tray so the water seems to be running through when there is no soap in it. PLEASE HELP! It sounds like the water valve has a clogged filter. Shut the cold water to the ...

...water not flowing quickly down the tube. I don't know how to access that part of the washer to see if something is stuck in it. If you remove the top cover you will see the soap dispenser unit on the ...

...not be enough to get all the soap into the tub and you'll be left with a wet clump of soap. If you've got a brisk supply of water, then it isn't flowing through the soap dispenser properly. Good

...water left in these containers. I have pulled out the entire dispenser compartment and cleaned it out but it keeps happening after every other time. Why would that happen? Also this is my replacement ...

...water pouring out of the top left where the dispenser tray goes in. After attempting to scrub the top of the dispenser housing as suggested below (it was nasty and a great suggestion) we plugged back ...

...left. take all the stuff out of there.. and there will be lots of "stuff". put a little pail under the hose part to catch the water first though. Scrub the machine with three tablespoons of cascade ...

My fabric softener dispenser is filled with water after a wash cycle Take out the soap drawer and clean the fabric softner compartment. This happens when there is residues left. And it gets clogged up

left full of water so she had to empty it before each use, a PITB. I took off top again removed the entire plastic box (held in place by two screws in front and two tabs on left side, also removed big

...left that has to seal properly. If the water appears only when washing, you can probably eliminate leaking from the water supply side up to the solenoids controlling the water. The most likely source ...

water, spins right and left a few times, and then after about 2 minutes quits with the LE code. Any other ideas? Hi LisaJ1165, I have a 2277 and had the same problem. A tech came out and couldn't find