Black & Decker 19" Electric Lawnhog Mulching Mower with Rear Bag "start charging" Questions

I have a craftsman electric key start lawn mower. I used the key start twice and have charged it after each mowing, but now the key start won't turn it over. the battery probably got over charge &

start until jumped again.Meter does not show mower is charging The battery needs to be checked.If its running with jump start this indicates that mower is fine but the battery is not supporting it for

charging the battery. If the battery is charged and i start the engine and mow, the mower mows fine untill the battery drains. the engine will continue to run fine but i cannot engage the PTO in order

The battery is charged and the mower will not start unless it is jumped. The battery shows that it is charged but will only start when it is jumped from the car battery. Though it shows charged, the ...

doesnt charge or start Hi there,have a Wedgewood 18 hp sit on mower and it doesn't charge the battery and will not start at all although I DO have a spark and fuel supply would be grateful for any ...

...the 2 wires are connected at the side of the motor, they might be black and white at the conector. starts but immediately quits. when I use starting fluid it starts than ...

...start it a few more times it did nothing. Is this the battery or something else? It is a battary issue, however it sounds like the engine is not charging the battary so it goes flat, or there is a ...

My Craftsman 16 hp and 42 battery not charging is it normal? get mower started and check the charging voltage at battery. it should be at least 13.5 at battery.check cables to battery and the inline ...

...start successfull, but battery did not stay charged after cutting. Possible charging coil under the flywheel issue, or with the retifier, there is a tool called a negative shunt, this will quickly ...

...start, no indication when the key is turned. The battery is at 12vdc. When jumped, the engine starts. The charging guage never shows a charge when running. When jumper cables are installed, the ...