Question about Whirlpool Refrigerators
...ice chute door just above the lever to fiil glass with ice it is either jamed with ice or is broken and needs a new repair kit.you can inspect by opening door and look at approx. 3 inch door that ice ...
Question about GE Refrigerators
ice, leave the door open, push in the door switch at the bottom, and press the dispenser. The plastic square does nothing while the motor is turning. That allows the door to stay closed and forces the
Question about Maytag Refrigerators
ice door (flap) to open for single slices? It just dumps until I release and then 32 OZ of ice pours out. Yes, the ice/water unit can be removed from the door to give access to the switch and solenoid
ICE DOOR WILL NOT LET ICE FALL DOWN CHUTE, REPLACED ICE DOOR FLAP BUT SEEMS TO BE STICKING BECAUSE DOOR WILL NOT OPEN WHEN ICE IS DISPENSING. COULD THIS BE BECAUSE OF TOO MUCH TENSION ON SPRING THAT ...
...fall thru the door. Make sure it is sealed it sounds like you have outside air getting into your fridge. Sometimes ice holds this door open usually when you use crushed ice. hope this helps good ...
Question about Refrigerators
...motor and ice door? There is an ice door solenoid that pulls that open and the linkage may be binding. Check www.searspartsdirect.com and look at the diagram and parts list. Look for the ice door
...ice maker door seal allow enough humidity in to cause this ice problem. Thanks in Advance Tim Hi, Check and see if the gasket is leaking any where. Also check and see if the door to you ice dispenser ...
Question about LG Refrigerators
...door ice maker, water won't fill in ice tray lg in door ice maker, water won't fill in ice tray I had that problem and water was also leaking. I tossed the ice and kept the door open for ...
...door that prevents ice build-up around the ice maker? Check and make sure that the flap that lets the ice out is shutting properly. When warm air enters the freezer door, it condensates then water ...
41 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: