Question about KitchenAid Food Mixers
hinge pin goes through there is a screw, unscrew it a little, push the hinge pin back to where it belongs and then tighten the screw up tight. Turn mixer up the right way, raise head up, fit bowl &
...hinge pin keeps making its way out, which can be fixed by tightening grub screw that sits inside the pedestal (you will need to turn the mixer around) or you could purchase a Super Hinge Pin, which ...
...pin hinge keeps moving out horizontally during operation If you turn the mixer upside down, you will be able to see a locing screw which holds the hinge pin in place. Center the pin and tighten the ...
Question about KitchenAid Food Mixers
head of my Kitchen Aid stand mixer wiggles a lot when I us it Put it upside down on a towel and tighten the hinge pin screw right up inside the pedestal. It's in the middle & retains the hinge pin
Question about KitchenAid Food Mixers
Hinge pin came out from head of mixer and can't put it back..will only go through part way. Hinge pin came out from head of mixer and can't put it back..will only go through part way. did ...
Question about KitchenAid Food Mixers
...hinge pin doesn't make contact with the pin. What can I do? Kitchen aid mixer set screw on hinge pin doesn't make contact with the pin. What can I do? If there is a set ***** in the hole then ...
Question about Food Mixers
...hinge pin is normally locked in place by a screw. If that screw is not loosened enough the pin will not be easy to put back in place. Put the mixer on its side and look through the base. You should ...
...hinge pin back into the kitchen aid mixer The hinge pin came out of the mixer. How to I get it back in? Good morning, Sorry to hear you are having an issue with your appliance. We have create a video ...
Question about KitchenAid Food Mixers
hinge pin that holds the motor head onto the base. if it fell out then the answer is simple. Turn the mixer upside down and wiggle the base while sliding the pin back in. Once the pin is back in place
...hinge pin. It will not go all the way through to the other side. They only go in in one direction and the knurled end MUST fit into the knurled grooves in the base unit. Put it in, smooth end first ...
144 questions posted
Usually answered in minutes!
493 Questions
357 Questions
285 Questions
205 Questions
183 Questions