Maytag MFD2560HES Bottom Freezer French Door Refrigerator "plastic" Questions

burned plastic part on refrigerator compressor kitchen aid side by side refrigerator freezer, smelled melting plastic, found a plastic box connected to the compressor burned. What is this and how much

...1/4 inch brass insert and delrin sleeve with a 1/ compression nut and connected this to a 1/4 inch plastic water line. Help! Diana The plastic water line uses a little brass sleeve that insurts on ...

...When I checked the fan I saw that the blade was not connected to the fan motor. The blade is plastic and just slipped back on. There wasn't anything on the rod to hold the blade in place. Is ...

ICE WITH PLASTICS TRAY WHAT IS THE DIFERANCE IN THE ICE THAT COMES FROM THE PLASTIC TRAY IN THE FRIDG AND YOU SAID IF I MAKE ICE FROM A PLASTIC TRAY IT MITE BRAKE THE ICE BUCKET IF I USE CRUSH MODE ...

Gouges in ceramic stovetop. Roasting pan set on a very hot burner. Pan had remnants of plastic packaging on the bottom. Plastic packaging hit the burner and explosive bits of ceramic blew up. Lots of ...

...to get it up and running. Upon the ice being made we noticed that the ice had a funky taste (like plastic). Is this because we used the plastic tubing? Should we get the metal one instead? I would ...

...the freezer from the top. It is supposed to fill the tray by flowing into the larger diameter plastic pipe and empting by gravity into the tray. The water regularly freezes in the plastic tube ...

our water line has a pin hole leak. can we repair the line (plastic) without replacing it? (Our line runs thru the floor down in the basement thru a small pvc pipe.) sure just get a plastic 1-4th in ...

How do you remove the clear plastic cover on the crisper drawer of a Samsung Refrigerator Model RF4287HARS There is liquid from spills and little pieces of something between the white plastic and the ...

Door shelf, need to take it apart. The removeable door shelves (containers) are partly molded white plastic and partly clear plastic (in the front). How can we separate the clear plastic part from the