LG TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher "wm2688h reset" Questions

have to unplug after each wash I have to unplug the washing machine after each wash in order to reset and turn on again. Yes sounds like your controller is having a hard time "Resetting" itself at the

door will not open or run. Looks like machine has ran through the cycle. Many modern machines will not open the door unless all of the water has been drained. Check by lowering the drain hose to floor

washer won't fill. code LE Try unplugging and replugging. Apparently it does a reset of something. It worked for me. I would make sure you don't have to much laundry in the machine too. Manual for ...

OE error rest machine and error comes up again OE error reset  machine and error comes up again water doesnt drain  removed cloths and start again  and i get OE what should I do?

where is the reset button located? there is no reset button, to reset the system unplug it from the wall for 5 minutes, this will reset the system, if it still has a problem you most likely have a ...

LG Tromm front loader-FE error code Won't restart or unlock. Still has water in it. Is there a reset switch? I fixed the issue that set it off The water overfills due to a faulty water valve. The ...

What does the LE symbol mean on my Tromm LG washing machine? What to do to reset it? most common cause is bad hall sensor

IE is the error I keep getting. How do I reset? Hi, plug off the wall, etc. Remove the rear cover. There is a thin tube coming from the control panel area to the base where the water exits, this ...

On LG waser have an Error LE message. Drained the On LG washer have an Error LE message. Drained the water from small hose and cleaned filter but cannot reset error on washer. bad hall sensor

My dryer turns on, but it won't start drying. It My dryer turns on, but it won't start drying. It says to check filter, but all is clear. Clean out you vent tube the full length. Try a load with the ...