...washer empty and the same error code came up. any suggestions?? I had the same problem. I found a water leak on the water valves at the back on the unit. This leak dripped on a wire that lead back to ...
...washer and it still does the same thing Hi, UE means that the unit is unbalanced. Take the clothes out and see if it spins without them, if so then it might just be an unbalanced load. If it acts up ...
Question about LG WM Washing Machines
...run with NO LOAD!! Gets to spin, does back/forth balancing act for 7min before UE flashes. Hit start/pause to clear, again to restart. sometimes will go thru, sometimes clothes are still damp at end ...
Question about LG Washing Machines
run completely empty. a single load can take up to 6 hours to complete.Manufacturer nonresponsive. Solutions? LG issued a recall on certain waveforce washers due to the unbalanced error codes. You may
...washer is properly leveled. An unbalanced load can trigger the UL (unbalanced load) code. Use a level to check if the machine is sitting evenly on the floor. Load Distribution: Make sure the clothes ...
...run on the new and improved control boards that is supposed to correct this problem. Double check your load distribution first (which it seems you already have), then check with the manufacturer to ...
...run it with no clothes in the washer you have a cracked motor housing. Lay machine on its back. remove centre motor bolt with allen wrench. pull off rotor. remove four bolts holding windings. unplug ...
Question about Maytag Washing Machines
washer seems okay, is this the cheap and easy fix it seems, or might other damage have occurred from all that overloaded/unbalanced loads? Am I doing any harm running a few small loads on the old belt
...washing machine always has an unbalanced indicator, even if i run it empty. Check the balance load sensor. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE
...run" a load through. Once that "load" is done and I push the coin-filled coin tray in, I get the "unbalanced" light and no action (unless I intervene again with the timer). Any advice? Thanks! Lift ...
377 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
243 Questions
245 Questions
234 Questions