LG 50PX1D 50 in. Plasma Television "base screws" Questions

base has 8 screws I Hi there, if you are trying to just remove the base, then on your model there is one screw in the center of the underside of the base. If you want to remove the neck of the base to

...base removal screws were exposed. Be careful, the screws were tiny and could easily fall inside the TV. If that doesn't help you, try searching online for your owner's manual. There are many websites ...

...screws are removed the base comes off including the mounting bolt and the rectangular shaped plastic panel. There are no electronics or any components inside the base panel, only the bolt and plastic ...

...base X l X 2 screws 4 inches from base ______l______ The base Keep your feet clear as your undoing the last screw..the base slides out vertically downward and weighs about 10-15 pounds so keep your ...

...base screws I just got a 52" lcd Samsung and has no screws for the base. What kind of screws should I purchase? is there a specific kind of screw? How do I get the screws for my sony flat panel tv ...

...screws on rear of tv above base 3)pick up tv and base will come off once you remove it you realize how easy it is I struggled with this at first but realized it was simple in the end!! 1 - Locate and ...

...base, and replace the screws in case you need to use the base in the future. I suspect the problem others are having is that they only removed 2 of the screws. Two screws on bottom and the two screws ...

base yet ? The 2 screws on each side directly above the stand legs need to be removed. You do not need to remove the big plastic back panel. Remember the TV is heavy, the screws are under pressure and

...screws holding base on. Lay it on a table on its face with base hanging over the edge, using a towel or blanket so you don't scratch it. The screws should be just above where the base goes into it. ...

...base screws I just got a 52" lcd Samsung and has no screws for the base. What kind of screws should I purchase? is there a specific kind of screw? Went by Future Shop and asked them to show me what ...