Question about Konica Minolta bizhub Office Equipment & Supplies
status P 8 P 21 I have no idea what either of these mean or how to go about getting rid of it. Please if you can help me I would be greatly appreciated! P-8 is for yellow imaging unit failure. P-21 is
Question about Cannon Office Equipment & Supplies
Status of purchase Cannon Pixma Printer 2/8/2016 purchase with Groupon 2/8/2016 Status of my order
Question about Toshiba Office Equipment & Supplies
8] are pressed simultaneously. (2) Key in "400", then press the [START] button. (3) Change the displayed current status counter value "32" to "0", then press [ENTER] or [INTER- RUPT] (to cancel C448).
Question about Lanier Office Equipment & Supplies
similar like this (8~) my lanier 6425 on the status screen it keeps blinking a yellow light. the light is similar to a figure eight and a squiggly line(8~) It means there is a paper jam in the machine
Question about Toshiba Office Equipment & Supplies
...Status", the meter reading is displayed in the bottom right corner. HIT THE '" USER " BUTTON THEN SELECT " Counter" and then select " Print" you can print out the print counter, also why don't u go ...
...menu. 6.Click Print . The Supplies Status page prints or you can also Press and HOLD the GO Button for 6 to 8 seconds and release and a configuration Page will print out with the printer ...
Question about Toshiba Office Equipment & Supplies
...status counter is dispalyed as follows: [C41]: "1" or "2" [C42]: "6" [C43]: "4" [C44]: "5" [C46]: "7" [C47]: "8" [C48]: "9" (4) Turn OFF the power and then back it ON again, and make sure that the ...
...status). Your copier is sensing an error in its fuser. You can try going into (08) mode by holding 0 and 8 while turning on the copier. Once the copier starts up key in 400 and press start, input "0" ...
8] keys simultaneously to turn on the power. (3) Input 400 using the numeric keys, and press the start key. (4) Change the displayed status counter from [2] to [0], and press the SET key (Reset C41).
...status counter (1) Turn ON the power while [0] and [8] are pressed simultaneously. (2) Key in ?400?, then press the [START] button. (3) Change the current status counter value ?1? or ?2? to ?0?, then ...
1,254 questions posted
Usually answered in minutes!
924 Questions
417 Questions
261 Questions
256 Questions
111 Questions