...not use hot water. thats when the machine stopped working. hook up hot hose and turn on the hot water and dont use hot water control it will not use no hot water ,but washer need to see the water ...
...water level does not seem correct in duet GHW9300WHP Washing Machine. When machine washes no water is visable, wash gets wet but no standing water . I seem to remember when the machine was new that ...
Not enough water Our Duet ( front loader) is not using enough water. Consequently, the laundry is not properly cleant. Is there a way to set up the Duet so that we can select the water level ( low, ...
Question about Whirlpool duet Washing Machines
...not shutting off water supply to machine, it continues to trickle in , in beween washes. you can turn off the water supply between washes see if this helps, and if it does then youll know its the ...
...not have a hot water supply to the machine you can only run it with the cold temperature setting. This machine does not have an internal water heater and relies on the hot water supply from the house ...
Question about Whirlpool duet Washing Machines
not enough water in machine maybe it is not the right pump. The pump removes water from the machine. If it is not filling enough, that is a different problem. Did you turn the water off for the repair
...water not cold When I run the cold/cold cycle the wash cycle water is warm. The hoses are hooked up correctly and screens are clear. I turned off the hot water inlet to see if it would run with just ...
not enough water in my machine? when my machine is washing there is no visable water in it. On mine, it does not swim clothes in water, but certain parts of the cycle, you do see water in the machine.
Question about Whirlpool duet Washing Machines
the washer will not properly operate with only one incoming source of water. Are the water inlet hoses kinked? Straighten the water inlet hoses. Are the water inlet valve screens on the washer clogged
Question about Whirlpool duet Washing Machines
...not detect water entering machine and then valves will be turned off and the error code will be displayed. In my experience the CCU is the problem (control board). IF the machine has water! If not, ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions