...drum splits, as there are no clips, screws or fasteners to keep the two halves together. It doesnt have a spider but a drive wheel with centre nut. Is it possible to change the bearings on this ...
Question about Zanussi Washing Machines
...bearing which if you cant turn the drum sounds jammed if so you will need new drum bearings and to replace them you will have to split the case, but having seen it from the bottom it should be ...
you have got too split the drum would recomend an engineer regards jason Some models like the WE12 have sealed drums where the bearings can't be changed. You have to buy a complete unit for about £120
...how to remove the front to do so The whole of the tub and drum assembly has to be removed and split down. If you have never done this before, I don't fancy your chances of success. Sorry to be ...
...split outer drum all way around middle and remove back half to get access to bearings etc. Any one got any suggestions which would be really appreciatted. thanks. noisy,vibration during spin cycle. ...
Question about Hotpoint Washing Machines
...split the drum. If the drum splits at the rear, removal from machine probably not required. Remove the clamping system and pull off the rear plate. Seal and bearings will come away with the plate. ...
i have been told that i will need a replacement drum as my bearings have gone and the drum cant be split.is this true as a new drum is 200 quid. Not true, bearings can be bought and replaced.
...split the drum in order to get the bearings out? The only 100% solution is to replace the whole rear tub half complete with bearings, you may also need to replace the drum shaft as well, because any ...
...on the indesit Wil123suk model please. Does the spyder come off or does the drum have to be split. no need to remove the drum u just unscrew the screws and spyder wil come and u can change the ...
Question about Hoover Washing Machines
...solutions 2 this problem the first thing to check is the vacuum system or it is a split in the pressure switch hose machine shoots water into drum during spin cycle and leaves to much water in ...
1,290 questions posted
Usually answered in minutes!
666 Questions
541 Questions
485 Questions
500 Questions
151 Questions