Question about Kenmore Washing Machines
Drum seems to be loose. Metal to metal sound each time it rotates My Kenmore Washer/Dryer Combo (417.98862890) seems to have a problem with the dryer drum. While Im drying cloths, the drum seems to be
...seems ok. It is set level. Checked drum tension springs / drum belt and made sure transit bolts had been removed, which they have. Seems to be coming from outer steel drum to its plastic casing? Any ...
...seems to be inside the drum between the plastic outer casing and the inner drum hope you can help thank you gordon Two possibles for this are aloose balance block or cracked drum spider.The front ...
Question about Frigidaire Washing Machines
...drum in Frigidaire GLTF1240AS0 seems to have dropped back and down, causing it to clunk and not rotate properly. Seems to hit the bottom at certain points. Any help would be greatly appreciated. ...
...ultime wt640 has a slight squeek seem to be on front around door area had top off and turned drum motor and drum seem fine and springs ok Remove rear cover of washer, remove drum belt,and from ...
...drum seems to run crooked and rubs... The drum seems to run crooked... It will turn for about 3/4 revolution - then it 'flops' against the rubber seal and rubs. Is it the bearings? How do I fix it? ...
...seems to be coming from inside the drum. Really noticable during spin cycles. Had the struts replaced a few years back, that was my first suspicion. They seem fine. Did notice the metal drum assembly ...
...seems to lift the whole drum assembly out some how what do you think There is no adjustment provided for adjusting or tightening drum. The drum is held in place by 2 springs at the top of the drum, ...
...seems fine but the drum is really wobbly. The hard plastic under the rubber around the front of the drum is breaking off. Any ideas what I can look for? This mom of 6 needs her washer go to this link ...
Question about Kenmore Washing Machines
...Drum seems loose. What to do? Shakes when agitating and spinning. Drum seems loose (can move back and forth when pushing on it with my hand. What needs to be fixed? Well, based on my experience, it ...
1,290 questions posted
Usually answered in minutes!
666 Questions
541 Questions
485 Questions
500 Questions
151 Questions