Question about HP LaserJet Office Equipment & Supplies
Can the rollers be lubricated to stop squeaks and groans? If so, how? You do not lubricate rollers directly. You lubricate the gears driving the rollers. I generally use white lithium grease.
Question about HP LaserJet Office Equipment & Supplies
my hp 2840 all in one laser jet printer squeaks when it is printing. How do I lubricate my 2840 HP laser jet printer? Corosol technology is older,slower sounds also too high, it is ...
printer is squeaking when printing. my printer is about 7 -10 yrs old, but is still printing fine. I run a small construction business, so the printer is not a high use printer, probably only 25-50 ...
Question about HP LaserJet Office Equipment & Supplies
When the printer/scanner starts it is giving a screeching sound which sounds like it is either confusing itself or has a dry bearing. It will usually settle down after a few cycles. Can it be cleaned ...
Question about HP LaserJet Office Equipment & Supplies
there was a problem with teflon sleeve in hp 1020 printer. so i replaced new teflon sleeve. But after i replaced teflon sleeve i faced a new problem. that is, there is a noise just like a drum frictio
Problem Squeaks really bad Remove drum unit and lubricate right side of the DRUM cartridge! The right side of the OPC!!!
Question about HP LaserJet Office Equipment & Supplies
Noise when paper is feeding through the HP 1000 It has a funny nocie when the paper is going through dust makes it clean and lubricate
Question about HP LaserJet Office Equipment & Supplies
...laser 2 = magenta laser 3 = yellow laser. The groan is most likely the polygon motor has lost its lubrication and may just need to be cleaned and re-lubricated. You can also try reseating the ...
oiling the laser scanner motor oiling laser scanner motor Remove top & side covers to reach laser scanner assm(see laser scanner assm,fig1) remove cover as specified in fig, remove 'C; clip to
after printing, last part of the paper is not released from the printer 99% the problem is in fusing section. The fuser fixing film is not well lubricated or even damaged. It has to be replaced with ...
1,256 questions posted
Usually answered in minutes!
1,429 Questions
724 Questions
663 Questions
593 Questions
492 Questions