ON SPIN CYCLE AGITATOR MAKE A LOUD BANGING SOUND IF I HOLD THE AGITATOR WITH MY HAND IT STOPS BANGING AND SEEMS NORMAL AS SOON AS I LET IT GO IT STARTS BANGING AGAIN I AM AFRAID IT'S GOING TO JAM AND ...
agitation issue We have a Whirlpool Ultimate care II that makes a loud knocking noise, the agitator post seems to freewheel and rocks back and forth by hand. Can you please offer some advise ? Thanks,
Question about Washing Machines
washer tries to agetate but instead when it tries the washer agetator turns a little dims lites and eventually triggers the breaker on the motor. it used to do it toward the end of the cycle(6 min ...
washer will not agetate or spin and will not Washer will not agetate or spin and will not unlock See if this post http://www.fixya.com/support/t4626959-lid_locked_not_open will help you open the ...
My Roper stoped working in between cycles I started my roper washing machine on large load cycle it stoped in the middle of agetating, I tried to see if any other cycle would work but nothing but ...
Question about Kenmore Washing Machines
...on the first wash cycle all other cycles work fine. usually this would be caused from stripped agetater dogs. take the fabric dispener off if you have one. if not take the cap off with a putty ...
...top load heavy duty Washer does not agitate but bottom half does. do you mean the top does not agetate but the bottom does? replace your agetator dogs part number 80040 you need to take the ...
agitator noise in maytag performa machine POssible cause and remidies? The noise in your washer tub could be caused by some object lodged under the agetator. Lift off agetator and check. Or somthing ...
Maytag performa PAVT234AWW top load washer. The washer fills and spins fine. But when it is the wash cycle, the agitator makes a grinding noise and kind of vibrates in place. Is this something that ...
Question about Washing Machines
The drain valve doesn't sem to close every time and the machine doesn't want to agetate when there is no water in it. I am fairly adequate with machines. Is it fairly easy to get to the valve? The ...
301 questions posted
Usually answered in minutes!
517 Questions
101 Questions
108 Questions
50 Questions
52 Questions