...scope Rotate elevation down to it stops then count up clicks to it stops then half number and rotate down that number then repeat with windage or you could use two v blocks and view a point through ...
scope out of elevation adjustment Have tried several different rails and rings If you are sure that the scope was mounted correctly to begin with, ie plenty of elevation left THEN you can install a ...
Question about Bushnell Optics
elevation adjustment, back to -0-, and start again. Try adjusting the knob the other way. It sounds to me like you're going backward. Screw the knob all the way the other way and then try another shot
Question about Centerpoint Technologies Optics
elevation is set at lowest setting and I'm still about 1" above target at 30'. I am using a center point 3 x 9 x 40 scope on a Benjamin Elite Power Master .177 cal pellet gun with a pellet velocity of
...is the one you will use for elevation. If you have 3 knobs, the left one is for parallax adjustment, focuses the scope for specific ranges. the top knob is the elevation adjustment in this case
Question about Nikon Optics
and elevation screws to set the scope correctly Check you mounts. If mounted properly you should have enough. if they are not moving at all you have prob broken the fine wires that form the crosshairs
Question about Conquest Optics
New Zeiss 2.5-8 Conquest MC Riflescope. Elevation clickstop adjus Recently I imported a new Zeiss 2.5-8 Conquest MC Riflescope. I live in New Zealand and do not have ready access to technical support.
elevation back in range. I currently shoot about two inches high this is an excellent article on zeroing a scope. http://www.outdoorpros.com/How-To-Guides/How-To-Zero-A-Rifle-Scope/5 at what range are
...elevation adjustment? if the scope is out the best way to set it up is to clamp the rifle in a jig or hold it hard done on a sand bag,,,firs off the first shot at the bull and see were the shot hit ...
scope elevation adjusted allthe way up & still shoots low i have tc encore 30-06 pistol w/ tc mounts & scope, bore sighted & crosshairs low w/ elevation adjustment maxed out, windage is ...
1 questions posted
Usually answered in minutes!
24 Questions
20 Questions
5 Questions
4 Questions
4 Questions