2005 Chevrolet Aveo Sedan "jack stand" Questions

...parking brake. 2. Apply the brake pedal at least 10 times. 3. Raise and support vehicle with jack stands, etc. 4. Remove the tire and wheel assembly. 5. Remove the lock ring and the caulking ...

On one jack stand. Problems How to put on jack stands Jack the car up, insert the jack stand and lower the car. Only put jack stands on one side of the car at a time.

jack stand is to provide safe solid support for the vehicle while you are performing work on it. Going under a supported vehicle at any time can be dangerous. - I was taught to place jack stands under

put jack stands uder a 2001 Lincoln LS WHERE DO I PLACE FLOOR JACK TO RAISE UP AND PLACE 4 FLOOR JACK STANDS UNDER CAR place the trolley jack under the front cross member . (The big bit that connects ...

...stand and the jacking point to avoid damaging the body / component. If the propeller shafts are to be removed, select NEUTRAL in the main gearbox. Carefully lower jack until vehicle sits securely on ...

jack stand spots? Where are other places I can place the jack stands, besides the 4 points where you'd jack to change the tire? I can jack the car then place the stand in the same place...Help me out.

2004 tiburon : front jacking points? The official front jacking points are on the reinforced edge of the unit body, just behind the front wheels. If you're using a hydraulic jack, you can jack the ...

...are car ramps that give enough clearance to be able to remove tranny from beneath vehicle. Most jack stands are too short for same. in the past I have had to do this, and with car not moving, ...

...jack stand. Never move under a vehicle when it is supported by only a hydraulic jack. Rest the vehicle on the safety stands before moving under the vehicle. The jack should be removed after the jack ...

...jack or a center stand. Here are the steps to use a motorcycle jack: Place the motorcycle on a flat surface and ensure that it is in neutral gear. Position the jack under the frame of the motorcycle ...