zebra zm400 turn printed info 180 degrees when the zebra zm400 prints the information on labels, the printed info is facing the printer. Are there printer settings that would rotate the info 180 ...
zm400 cannot use com1 Use a null modem serial cable . Match computer com1 serial port settings with printer serial port settings.
Question about Zebra Office Equipment & Supplies
zm400 media darkness settings get reset after printings lable from SAP The printer driver settings override the printer settings unless you tell the driver to use the printer settings. You can tell by
our zebra zm400 is set to ****-off and everything seems fone for a while, then the backing take up roll (rewind) stops rewinding and the backing starts to hang down the front. Go into the setup menu ...
Question about Zebra Office Equipment & Supplies
I can't print label from ZM400 PRINTER thru' serial port I connected my ZM400 printer in serial port. When i sent test print it's not coming out. Their is no error message in the printer control and ...
...zm400 onto our network with another zebra z4m plus, was installed by a expert from his office by logmein, it seemed to work fine but printer will not print any more than 1 label at a time, which is ...
Question about Zebra Office Equipment & Supplies
...ZM400? Please help. I need appropriate printer setting. you should recalibt=rate the printer. Are you sure that your previous label was not longer? With the autocalibrate function activated the ...
i can't print to my printer zm400 Hello. I am using a printer zm400 so us to print tickets. I am a nautical agent. I performed the cancel self test to see if the printer can print something and it did
Question about Zebra Office Equipment & Supplies
...ZM400 is to set the power on setting in the LCD menu to calibrate and the head close setting to feed, save these settings in memory and then reboot the printer. This way, you will only need to reboot ...
...in ZM400 printer it was showing Error condition ribbon out in that printer screen In the printer setting- Change the Print Method from - "Tharmal Transfer to Direct Thermal" and save it ...
264 questions posted
Usually answered in minutes!
402 Questions
235 Questions
259 Questions
211 Questions
166 Questions